4Ch H.264 hardware codec
- Network DVR
How do I
How do I
How do I
How do I
“
PING
PING
PING
PING
”
an IP address ?
an IP address ?
an IP address ?
an IP address ?
1. Open an MS-DOS (or Command) prompt
2. At the prompt type
– “
ping xxx.xxx.xxx.xxx
”
(without the quotes and replace the x
’
s with an IP address)
3. Press Enter
Ping Result. When testing for a usable IP address, verify that you get a
“
Request timed out
”
message. This ensures that the IP address that you have tested is not being used by another
device on your network.
How do I open an MS-DOS or Command Prompt ?
Windows 98/ME :
Start -> Programs -> Accessories -> MS-DOS prompt
Windows 2000/XP :
Start -> (All) Programs -> Accessories -> Command Prompt
CHAP 8. FAQ
59
Summary of Contents for SecuBook
