OR-7200ED User’s Manual
74
Step 2) Selecting a starting point of data for Remote Archiving.
First
: Archiving from the very beginning of recorded data on DVR.
Last
: Archiving from the latest recorded data on DVR.
Specific
: Archiving from designated point by user. If data doesn’t exist on the designated point, archiving will start from the latest data
right after the designated point.
Load
: Shows the status of recorded data on the DVR. It is displayed on Recording Interval List.
Step 3) Setting performing schedule for Archiving.
Auto Connection Scheduler
: Set a time schedule for Archiving. Select a time for Start/Stop point, the system will automatically
perform Archiving as the schedule set. If Archiving is failed due to any causes, it will continuously attempt to re-connect the sites. If
Always is selected, Archiving will continue until user stops the operation.
Note
: The S/W only attempts to reconnect the site when it is within the Archiving schedule as pre-set.
Overwrite
: Select Overwrite to overwrite storage. When it is full, the oldest data is automatically overwritten by the latest data, and
Archiving continues.
