ORiNOCO BG-2000 User Manual Download Page 27

Page: 27 / 128

The Management Tool

4-3

■

WAN Connection Type: indicates the connection type you are
currently using to connect to your service provider.

■

LAN Interface: indicates your connection (connected or disconnected)
to your Local Area Network.

■

Primary DNS: Primary Domain Name System address.

■

Secondary DNS: Secondary Domain Name System address.

■

Active Profile: indicates the name of your last saved configuration.

■

Uptime: indicates the amount of time elapsed since the last time the
device was powered up or reset.

■

Recent Events Log: shows the five most recent events that your
device has performed.

■

View Event Log: contains a list of performed configuration
modifications and/or error messages.

Summary of Contents for BG-2000

































































































































Search results

Summary of Contents for BG-2000

Reviews:

Related manuals for BG-2000

Brands by name

Popular brands

ORiNOCO BG-2000, User Manual

Search results

Summary of Contents for BG-2000

Reviews:

Related manuals for BG-2000

Brands by name

Popular brands