Q I G
Quick Installation Guide
Q
uick
I
nstallation
G
uide
Q I G
Specifications
Resetting
To restore the device configurations back to the factory defaults, press the
button for 5
Reset
seconds. Once the power indicator starts to flash, release the button. The device will then reboot
and return to factory defaults.
PRINTED ON RECYCLED PAPER
ORing Industrial Networking Corp.
Copyright© 2021 ORing
All rights reserved.
TEL: +886-2-2218-1066
FAX: +886-2-2218-1014
Website: www.oringnet.com
E-mail: [email protected]
Configurations
6
5
7
3
2
1
8
4
After installing the
and connecting cables, he green power LED
switch
t
should turn on. Please refer to the following tablet for LED indication.
3. After logging in, you should see the following screen. For more information on
configurations, please refer to the user manual. For information on operating the device
using ORing’s Open-Vision management utility, please go to ORing website.
Version 1.0
10/100/1000Base-T(X) M12 port with X-Coding
Pin No.
Description
#1
BI_DA+
#2
BI_DA-
#3
BI_DB+
#4
BI_DB-
#5
BI_DD+
#6
BI_DD-
#7
BI_DC-
#8
BI_DC+
8-Pin Gigabit Port Definition
LED
Color
Status
Description
PWR1
Green
On
DC power module 1 activated
PWR2
Green
On
DC power module 2 activated
R.M
Green
On
Device operating in Ring Master mode
Ring
Green
On
Ring enabled
Blinking
Ring structure is broken
Fault
Amber
On
Errors occur (i.e. power failure or port malfunctioning)
10/100Base-T(X) Ethernet ports
LNK/ACT
Green
On
Port is linked
Blinking
Transmitting data
Speed
Amber
On
Port is running at 100Mbps
Off
Port is running at 10Mbps
10/100/1000Base-T(X) Ethernet ports
LNK/ACT
Green
On
Port is linked
Blinking
Transmitting data
Speed
Green
On
Port is running at 1000Mbps
Amber
On
Port is running at 100Mbps
Green/Amber
Off
Port is running at 10Mbps
1. Launch the Internet Explorer and type in IP address of the device. The default static
IP address is
192.168.10.1
Follow the steps below to log in and access the system:
2. Log in with default user name and password (both are
).
admin
Power
Input Power
Power Consumption(Typ.)
Dual 24VDC (power rating: 16.8~30VDC) on dual 4-pin male S-coding connector
20 Watts
Reset Function
Reset Button
< 5 sec: System reboot, > 5 sec: Factory default
Overload Current Protection
Reverse Polarity Protection
Present
Present
ORing Switch Model
10/100 Base-T(X) Ports in
M12 Auto MDI/MDIX
12 (4-pin female D-coding)
Physical Ports
Technology
Ethernet Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1x for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
8k
MAC Table
8
Priority Queues
TES-W9124GT-M12X-BP2-24V-IP54
10/100/1000Base-T(X) ports
in M12
4 (8-pin female X-coding with 2xbypass function included)
RS-232 Serial Console Port
RS-232 in M12 connector (female A-coding). Baud rate setting: 115200bps, 8, N, 1
Store-and-Forward
Processing
Switch Properties
Switching latency: <7 µs
Switching bandwidth: 10.4Gbps
Throughput (packet per second): 7.738Mpps@64Bytes packet
Max. Number of Available VLANs: 4095
IGMP multicast groups: 128 for each VLAN
Port rate limiting: User Define
Security Features
Device Binding security feature
Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1Q) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Https / SSH enhance network security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10/30ms over 250 units
. Fast Ethernet ports supports less 10ms milliseconds recovery time
NOTE 1
Gigabit Ethernet ports supports less 30ms milliseconds recovery time
NOTE 2.
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Server/Client/Relay
SMTP Client
Modbus TCP
Network Redundancy
O-Ring
O-Chain
MRP
*NOTE
MSTP (RSTP/STP compatible)
4Mbits
Packet Buffer Size
Up to 9.6K Bytes
Jumbo Frame
Physical Characteristic
Enclosure
IP-54
Dimension (W x D x H)
280 (W) x 90 (D) x 182 (H) mm (11.02 x 3.54 x 7.17 inch.)
Weight (g)
3215 g
Environmental
-40 to 85 C (-40 to 185 F)
o
o
Storage Temperature
5% to 95% Non-condensing
Operating Humidity
Regulatory Approvals
EN 55032, CISPR32, EN 61000-3-2, EN 61000-3-3, FCC Part 15 B class A
EMI
EN 55035 (IEC/EN 61000-4-2 (ESD), IEC/EN 61000-4-3 (RS), IEC/EN 61000-4-4 (EFT),
IEC/EN 61000-4-5 (Surge), IEC/EN 61000-4-6 (CS), IEC/EN 61000-4-8(PFMF), IEC/EN 61000-4-11 (DIP))
EMS
IEC60068-2-27
Shock
IEC60068-2-31
IEC60068-2-6
Vibration
Free Fall
MTBF
177,214 hrs
EN 62368-1 (LVD)
Safety
-40 to 75 C (-40 to 167 F)
o
o
Operating Temperature
*Note: This function is available by request only.
CE EMC (EN 55035, EN 55032), FCC Part 15 B, EN 50155(EN 50121-1, EN 50121-3-2)
EMC
EN 50155(IEC 61373)
Other
Warranty
5 years
TES-W9124GT-M12X-BP2-24V-IP54
TES-W9124GT-M12X-BP2
-24V-IP54
EN50155 Industrial IP-54 managed
Ethernet switch
S w i tc h
E N 5 0 1 5 5
I N D U S T R I A L
I P - 6 7
