TES-3082GT-M12-BP1 User’s Manual
ORing Industrial Networking Corp
36
5.1.7
Port Setting
5.1.7.1
Port Control
By this function, you can set the state, speed/duplex, flow control, and
security of the port.
Port Control interface
The following table describes the labels in this screen.
Label
Description
Port NO.
Port number for setting.
State
Enable/Disable the port.
Speed/Duplex
You can set Auto-negotiation, 100-full, 100-half, 10-full,
10-half mode.
Flow Control
Support symmetric and asymmetric mode to avoid packet
loss when congestion occurred.
Security
Enabled port security will disable MAC address learning in
this port. Thus only the frames with MAC addresses in port
security list will be forwarded, otherwise will be discarded.
Apply
Click “
Apply
” to activate the configurations.
