TES-3082GT-M12-BP1 User’s Manual
ORing Industrial Networking Corp
96
function
monitor tx
G
Set TX destination
port of monitor
function
switch(config)#monitor tx
show monitor
P
Show port monitor
information
switch#show monitor
monitor
[RX|TX|Both]
I
Configure source
port of monitor
function
switch(config)#interface
fastEthernet 2
switch(config-if)#monitor RX
show monitor
I
Show port monitor
information
switch(config)#interface
fastEthernet 2
switch(config-if)#show monitor
no monitor
I
Disable source port
of monitor function
switch(config)#interface
fastEthernet 2
switch(config-if)#no monitor
6.12
Commands Set List—802.1x command set
Commands
Level Description
Example
8021x enable
G
Use the 802.1x
global configuration
command to enable
802.1x protocols.
switch(config)# 8021x enable
8021x system
radiousip
[IP address]
G
Use the 802.1x
system radious IP
global configuration
command to
change the radious
server IP.
switch(config)# 8021x system
radiousip 192.168.1.1
8021x system
serverport
[port ID]
G
Use the 802.1x
system server port
global configuration
command to
change the radious
server port
switch(config)# 8021x system
serverport 1815
8021x system
accountport
G
Use the 802.1x
system account
switch(config)# 8021x system
accountport 1816
