Port based network access control (802.1x)
VLAN (802.1Q ) to segregate and secure network traffic
Radius centralized password management
SNMPv3 encrypted authentication and access security
Software Features
STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 20ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffic
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping
IP-based bandwidth management
Application-based QoS management
DOS/DDOS auto prevention
Port configuration, status, statistics, monitoring, security
DHCP Client/Server
Network Redundancy
O-Ring
STP
RSTP
MSTP
RS-232 Serial Console Port
RS-232 in DB9 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator (PWR)
Green : For AC power indicator
Green : For AC and for DC power indicator
Power-1 Indicator (PW1)
N/A
Green : Indicate Power-1 input
Power-2 Indicator (PW2)
N/A
Green : Indicate Power-2 input
Power-3 Indicator (PW3)
N/A
Green : Indicate Power-3 input
System Ready Indicator (STA)
Green : Indicate system ready. Blinking for system is upgrading firmware.
Ring Master Indicator (R.M.)
Green : Indicate system operated in O-Ring Master mode
O-Ring Indicator (Ring)
Green : Indicate system operated in O-Ring mode Blinking to indicate Ring is broken.
Fault Indicator (Fault)
N/A
Amber : Indicate unexpected event
occurred
Sysem Runnig Indicator (RUN)
Green : System operated continuously
Supervisor Login Indicator (RMT)
Green : System is accessed remotely
Reset To Default Running Indicator
(DEF)
Green : System reset to default configuration
Ping Command To The Switch
Indicator (Ping)
Green : System is processing “PING” request
10/100/1000Base-T(X) RJ45 Port
Indicator
Left Green for 1000Mbps Link/Act indicator. Amber for 10/100Mbps Link/Act indicator
Right Amber for full-duplex indicator
100/1000Base-X SFP Port Indicator
Green for port Link/Act.
Fault contact
Relay N/A
Relay output to carry capacity of 1A at
24VDC
Power
Redundant Input Power
100 ~ 240VAC with power cord
100~240VAC with power cord, dual
36 ~
72VDC power inputs at 6-pin terminal block
Power Consumption (Typ.)
36 Watts
36 WattsTBD
Overload Current Protection
Present
Physical Characteristic
Enclosure
19 19-inches rack rack-mountable
Dimension (W x D x H)
443.7 (W) x 200 (D) x 44 (H) mm
431 (W) x 342 (D) x 44 (H) mm
Weight (g)
2700g
4250g
Environmental
Storage Temperature
-40 to 85
o
C (-40 to 185
o
F)
Operating Temperature
-40 to 70
o
C (-40 to 158
o
F )
Operating Humidity
5% to 95% Non-condensing
