IPS-3082GC-AT
User’s Manual
ORing Industrial Networking Corp
22
switch and it will be display in this column. The default IP is
192.168.10.1
Subnet Mask
Assign the subnet mask of the IP address. If DHCP client
function is enabling, you do not need to assign the subnet mask
Gateway
Assign the network gateway for the switch. The default gateway
is 192.168.10.254
DNS1
Assign the primary DNS IP address
DNS2
Assign the secondary DNS IP address
Apply
Click “
Apply
” to activate the configurations.
5.1.4.4
IPv6 Setting
Configure the switch-managed IPv6 information on this page.
Label
Description
Auto Configuration
Enable IPv6 auto-configuration by checking this box. If system
cannot obtain the stateless address in time, the configured IPv6
settings will be used. The router may delay responding to a router
solicitation for a few seconds, the total time needed to complete
auto-configuration can be significantly longer.
Address
Provide the IPv6 address of this switch. IPv6 address is in 128-bit
records represented as eight fields of up to four hexadecimal
digits with a colon separating each field (:). For example,
'fe80::215:c5ff:fe03:4dc7'. The symbol '::' is a special syntax that
can be used as a shorthand way of representing multiple 16-bit
groups of contiguous zeros; but it can appear only once. It can
also represent a legally valid IPv4 address. For example,
'::192.1.2.34'.
Link Local Address
In a computer network, a link-local address is a network address
that is valid only for communications within the network segment
