IPS-2042 Seris User’s Manual
ORing Industrial Networking Corp.
43
Label
Description
Port
Port number.
Delay Mode
Enable or disable Delay Mode
Delay Time(0-300)
Time to provide power
5.1.8.5 Ping
Alive
Check
You can control the POE function by using the ping command , in order to turn on or off
other POE device which connect with port assign.
The following table describes the labels in this screen.
Label
Description
Ping Check
Enable or disable Ping Check function
Send Mail
When " ping " fails,can notify users by mail
Port
You can appoint to want to control P.O.E port number
Ping IP Address
Set up ip Address
Interval Time
Spacing interval to set up Ping(10 Sec~120 Sec)
Retry Time
Set up the number of times of ping
Failure Log
Note down " Ping Check " a result of movement after starting.
Failure Action
Set up movements wanted to carry out
Reboot Time
Switch ping check failure " P.O.E " restarts the buffer time of
switch.
