IGPS-9080 Series User Manual
ORing Industrial Networking Corp
70
VLAN. To remove or exclude the port from the private VLAN,
make sure the box is unchecked. By default, no ports are
members, and all boxes are unchecked.
Adding a New Static
Entry
Click
Add new Private VLAN
to add a new private VLAN ID. An
empty row is added to the table, and the private VLAN can be
configured as needed. The allowed range for a private VLAN ID is
the same as the switch port number range. Any values outside
this range are not accepted, and a warning message appears.
Click OK to discard the incorrect entry, or click Cancel to return to
the editing and make a correction.
The private VLAN is enabled when you click Save.
The
Delete
button can be used to undo the addition of new
private VLANs.
A private VLAN is defined as a pairing of a primary VLAN with a secondary VLAN. A
promiscuous port is a port that can communicate with all other private VLAN port types via the
primary VLAN and any associated secondary VLANs, whereas isolated ports can
communicate only with a promiscuous port.
Label
Description
Port Members
A check box is provided for each port of a private VLAN.
When checked, port isolation is enabled for that port.
When unchecked, port isolation is disabled for that port.
By default, port isolation is disabled for all ports.
5.5 SNMP
SNMP (Simple Network Management Protocol) is a protocol for managing devices on IP
networks. It is mainly used network management systems to monitor the operational status of
