IGPS-9080 Series User Manual
ORing Industrial Networking Corp
107
will not match the ACE with Ethernet type.
Action
Specifies the action to take when a frame matches the ACE.
Permit: takes action when the frame matches the ACE.
Deny: drops the frame matching the ACE.
Rate Limiter
Specifies the rate limiter in number of base units. The allowed range
is 1 to 15.
Disabled
means the rate limiter operation is disabled.
Port Copy
Frames matching the ACE are copied to the port number specified
here. The allowed range is the same as the switch port number
range. Disabled means the port copy operation is disabled.
Logging
Specifies the logging operation of the ACE. The allowed values are:
Enabled
: frames matching the ACE are stored in the system log.
Disabled
: frames matching the ACE are not logged.
Please note that system log memory capacity and logging rate is
limited.
Shutdown
Specifies the shutdown operation of the ACE. The allowed values
are:
Enabled
: if a frame matches the ACE, the ingress port will be
disabled.
Disabled
: port shutdown is disabled for the ACE.
Counter
Indicates the number of times the ACE matched by a frame.
Label
Description
SMAC Filter
(Only displayed when the frame type is Ethernet Type or ARP.)
Specifies the source MAC filter for the ACE.
Any
: no SMAC filter is specified (SMAC filter status is "
don't-care
").
Specific
: if you want to filter a specific source MAC address with the
ACE, choose this value. A field for entering an SMAC value appears.
SMAC Value
When
Specific
is selected for the SMAC filter, you can enter a
specific source MAC address. The legal format is
"xx-xx-xx-xx-xx-xx". Frames matching the ACE will use this SMAC
