IDS-5042 Series
User’s Manual
9
ORing Industrial Networking Corp.
6. 10/100Base-T(X) Ethernet port
7. LED of 100Base-TX connection on Ethernet port.
8. RS-232/422/485 serial port. Mode configured by DS-Tool.
9. LED for P.O.E. and system status. When the P.O.E. power connected, the green LED will
be light on.. (IDS-5042+ and IDS-5042-I+)
10. RS-422/485 serial port with 2KV isolation. Mode configured by DS-Tool.
11. 10/100Base-T(X) Ethernet port. (P.O.E. PD port, IDS-5042+ and IDS-5042-I+)
3.2 Front Panel LEDS
The following table describes the labels that stick on the IDS-5042.
LED
Color
Status
Description
P.O.E
Green / Red
On
Power supplied over Ethernet Cable
Red Blinking
Indicates and IP conflict, or DHCP or BOOTP
server did not respond properly
PWR1
Green/Red
On
DC power 1 activated.
Red blinking
Indicates an IP conflict, or DHCP or BOOTP
server did not respond properly
PWR2
Green/Red
On
DC power 2 activated.
Red blinking
Indicates an IP conflict, or DHCP or BOOTP
server did not respond properly
Fault
Red
On
Fault event occurred.
S1 ~ S4
Green
Blinking
Serial port is transmitting data
Red
Blinking
Serial port is receiving data