Orima ORT 6018, Instruction Manual

Page: 24 / 48

DISPOSAL
Please dispose of it at your local community waste collec
on / recycling center and ensure it presents no danger to
children while being stored for disposal. The plug must be
rendered useless and the cable cut o
ff
to prevent misuse.
TROUBLE SHOOTING
Fault Cause Solution
Light on, but
motor does not
work
The blades are blocked.
The capacitor is damaged.
Replace capacitor.
The motor is damaged. Replace motor.
The internal wiring of motor is cut off/
disconnected. An unpleasant smell
may be produced.
Replace motor.
Both light and
motor do not
work
Apart from the above mentioned, check the following:
Light damaged.
Replace lights.
Power cord loose.
Connect the wires as per the electric
diagram.
Oil leakage
Outlet and the air ventilation entrance
are not tightly sealed.
Take down the outlet and seal with glue.
Leakage from the connection of
U-shaped section and cover. Take U-shaped section down and seal
with soap or paint.
Vibration
The blade, if damaged, can cause
vibrating.
Replace the blade.
The motor is not tightly fastened. Fasten the motor tightly.
The cooker hood is not tightly fixed. Fixed the cooker hood tightly.
Insufficient
suction
The distance between the cooker
hood and the cooker top is too large.
Readjust the distance.
Too much ventilation from open doors
or windows. Choose a new place to install the
appliance or close some doors / windows.
The
machine
inclines
The fixing screws are not tight
enough. Tighten the fixing screw and make it
horizontal.
The hanging screws are not tight
enough Tighten the hanging screw and make it
horizontal.
EN-12