ORIGO Mig C280 PRO, Instruction Manual, Page: 6 / 30

-- 6 --
C2834Pe
3 INTRODUCTION
Origo
TM
Mig C280 PRO & Origo
TM
Mig C340 PRO
are step controlled power
sources in a compact design, intended for welding with solid steel, stainless steel or
aluminium wire as well as tubular wire with or without shielding gas.
The possibility of welding with homogeneous wire/shielding gas and welding with
gasless tubular wire is obtained by switching the + and -- connections on the
switching terminal above the wire feed unit.
ESAB’s accessories for the product can be found on page 29 .
3.1 Equipment
3.1.1 Origo
TM
Mig C280 PRO
The power source is supplied with:
S
Welding gun PSF 250 -- 3m (Origo
TM
Mig C280 PRO 4WD -- 4,5m)
S
Return cable 3,5m with return clamp (Origo
TM
Mig C280 PRO 4WD -- 5m)
S
Shelf for gas cylinder
S
Instruction manual
3.1.2 Origo
TM
Mig C340 PRO
The power source is supplied with:
S
Welding gun PSF 305 -- 3m (Origo
TM
Mig C340 PRO 4WD -- 4,5m)
S
Return cable 3,5m with return clamp (Origo
TM
Mig C340 PRO 4WD -- 5m)
S
Shelf for gas cylinder
S
Instruction manual
4 TECHNICAL DATA
4.1
Origo
TM
Mig C280 PRO
Voltage 400--415 V, 3
∼
50/60 Hz 230/400--415/500V3
∼
50Hz
230/440--460V, 3
∼
60Hz
Permissible load at
100% duty cycle 150 A/22 V 150 A/22 V
60 % duty cycle 190 A/24 V 190 A/24 V
30 % duty cycle 280 A/28 V 280 A/28 V
Setting range (DC)
30A/15V--280A/28V 30A/15V--280A/28V
Open circuit voltage
15--38 V 15--38 V
Open circuit power
190 W 190 W
Efficiency
69% 69%
Power factor
0.97 0.97
Control voltage
42 V, 50/60 Hz 42 V, 50/60 Hz
Wire feed speed
1,9 -- 19m/min 1,9 -- 19m/min
GB