ORIGO Mig C280 PRO, Instruction Manual, Page: 28 / 30

Origo
TM
Mig C280 PRO, Origo
TM
Mig C340 PRO
Edition 101005
-- 28 --
wC2834P
Wear components
(W. F. Mechanisms 0459 000 884 & 0459 000 883)
Item Denomination Ordering no. Notes
A
Feed / Pressure roller
0459 052 002
0459 052 003
0458 825 001
0458 825 002
0458 824 001
0458 824 003
Ø 0.8--1.0 mm Fe, Ss & cored wire; V--groove
Ø 1.0--1.2mm Fe, Ss & cored wire; V--groove
Ø 1.0--1.2mm V--groove, knurled.
Ø 1.2--1.4mm V--groove, knurled.
Ø 0.8--1.0mm Al wire, U--groove.
Ø 1.2--1.6mm Al wire, U--groove.
B
Gear adapter 0455 053 880
C
Drive gear 0455 052 001
D
Inlet nozzle
0455 049 001
0335 318 001
Ø 3.0mm plastic for 0.6--1.6mm Fe, Ss, AL, cored wire.
Ø 2.4mm steel.
E
Intermediate nozzle
0455 072 002
0456 615 001 Al wire.
F
Outlet nozzle
0469 837 880
0469 837 881
Ø 2.0mm steel for 0.6--1.6mm wire.
Ø 2.0mm plastic for 0.8--1.6mm Al wire.
The rollers are marked with wire dimension in mm, some are also marked with inch.
Welding with aluminium wires.
In order to weld with aluminium wires, proper rollers, nozzles and liners for aluminium wires MUST be
used. It is recommended to use 3m long welding gun for aluminium wires, equipped with appropriate
wear parts.