ORIGO FH-C18, Instruction Manual

Page: 5 / 8

Function Setting
фૈ೛ۓ
4
1 /!λЈவхးڗрཪ॥ᐒǶ
2
/!ஒཪ॥ᐒᘍܫܭᛙڰޑѳय़΢Ƕ
3
/!ࡪᕴႝྍ໒0ᜢᗖԿᜢᐒރᄊǴஒකᓐකΕႝᓸ
220-240V
ޑᐱҥක০Ƕࡪᕴႝ!!!
!!!ྍ໒0ᜢᗖԿ໒ᐒރᄊǴႝྍᡉҢᐩߝଆǴཪ॥ᐒ຾ΕྗഢރᄊǶ
The Heater may be operated by the manual controls located on the Heater.
1. Carefully remove the Heater from the plastic bag and the carton.
2. Place the Heater on a stable flat surface.
3. Set the Main Power Switch to 'OFF' position. Plug the Power Cord into a a.c. 220
-240V electrical outlet. Turn the Main Power Switch to 'ON' position. Power indicator
will light on, the Heater is ready to use.
ഏ!ౠ!ཪ!॥!ᐒ
Ceramic Heater
4. ON/OFF: Press the key, the heater will start operation at High heat (1800W),
4
/!໒0ᜢǺࡪ!!!ᗖǴཪ॥ᐒஒаଯ዗
(1800W)
ၮբǴ
‘Continue’
⍲
‘High’
ࡰҢᐩӕਔߝଆǴ
ࡪ!!!ᗖёᙯඤԿե዗ၮբ
(900W)
ˤ
5 /!ኳԄǺࡪ!!!!ᗖǴ
‘Sensor’
ࡰҢᐩଢ୏
15
ࣾࡕǴཪ॥ᐒ຾ΕΓᡏགᔈኳԄၮբǶҁᐒ
߻БགᔈᏔ཮ܭᐒ߻
1.5
ԯຯᚆϣགᔈࢂցԖΓᡏ౽୏Ǵऩܭ΋ϩដϣ҂ૈགᔈ
!!!!!!!!Γᡏ౽୏Ǵҁᐒ཮ଶЗၮբϷ຾ΕࡑᐒރᄊǴচٰߝ๱ޑࡰҢᐩᝩុߝଆǶ྽ख़
!!ཥགᔈډԖΓᡏ౽୏Ǵҁᐒ཮Ծ୏ख़ཥၮբǶऩࡑᐒރᄊ࡭ុ
12 λਔԶ
҂ૈགᔈ
!!ҺՖΓᡏ౽୏Ǵҁᐒ཮Ծ୏ᜢᐒǶ
( གᔈԾ୏໒ᐒό೛ѰѓԾ୏འᘍ )
5. MODE: Press the key, ‘Sensor’ indicator light will keep flashing about 15 seconds
ݙཀǺಃ΋ԛ٬Ҕཪ॥ᐒǴёૈ཮р౜Ͽໆ਻ښऊኧϩដǴӢҁౢࠔӧғౢਔว዗ϡ
!!!!!!ҹ஥Ԗ΋ቫߥៈݨǴԜΏ҅த౜ຝǶ
NOTE: For first time operation, there will have some smell for about few minutes.
Because this Heater have some protective oil on the surface of the heating element.
ཪ॥ᐒё٬Ҕᐒيഗ೽ࡪᗖᏹ௓Ƕ
7
/!Ѱѓଌ॥Ǻࡪ!!!ᗖǴཪ॥ᐒаԾ୏ѰѓའᘍኳԄଌ॥ǶӵటଶЗԾ୏Ѱѓའᘍଌ॥Ǵ
!!!!!!!!!!!!!ӆ௓Ԝᗖ΋ԛǶ
7. OSC : Press the key will allow the Heater to oscillate the wind direction. To stop the
oscillation, press this key again.
6.
ۓਔ೛ۓ
烉
٬Ҕ!!!ᗖೱុࡪΠᒧۓ
7
ঁόӕޑԾ୏ᜢᐒਔ໔Ǵϩձҗ
1
Կ
7
λਔǴ٠Ԗࡰ
!!!!!!!!!!ҢᐩᡉҢςᒧ᏷ޑਔ໔Ƕ
6. TIMER: Press key continually to set desired auto power off time. There are 7 time
intervals, from 1-hour to 7-hour, for auto power off. The LED light indicates
the time selected.
the heater will stop working. The heater will work again whenever it detects any
body movement. If the heater cannot detect any body movement after 12 hours,
the heater will switch off automatically. (No auto oscillation under sensor mode)
and the Heater will work in sensor mode. Sensor will detect any body movement
‘Continue’ and ‘High’ indicator will light on. Press the key to set the
heater into low heat (900W).
in front of it within 1.5 meter . If no body movement is detected for 1 minute,