Safety Features
特殊安全裝置
5
1. A thermal overload protector is built-in to prevent overheating.
2. If the unit is tilted, a safety system will cut off the power automatically. Put the
unit on a vertical position and it will operate again.
3. When the Heater is overheat, it will be shut off automatically.
3.1. To RESET the Heater: Unplug the Heater and wait for 30 minutes to cool
down.
3.2. Turn ON the Heater again to resume operation.
1.
暖爐內置恆溫保護裝置，防止機身過熱。
2.
若暖爐傾倒，暖爐即時自動停止操作，直到將暖爐垂直放回固定平面上，方可
重新操作。
3.
當機內溫度超出限定溫度，暖爐將自動停止操作。需要重新設置才可恢復正常
操作。
3.1.
拔除插頭，等待
30
分鐘，讓機內溫度降低。
3.2.
重新插上插頭，讓暖爐繼續操作。
熱對流暖爐
Convector Heater
警告：不使用本機時，經常保持拔除電源，及切勿將此機浸於水或其他液體中。
清潔前應確保暖爐處於冷卻狀態。
清理：清理時切勿將此機浸於水或其他液體中。
使用吸塵機毛刷將保護網上的塵埃及雜物吸走。機身使用濕潤軟布抹擦清潔。
注意：切勿使用含有腐蝕性的清潔劑或溶液清理此機。
儲存：連同使用說明，把暖爐存放於清涼及乾爽的地方。
WARNING: ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING. DO
NOT IMMERSE THE HEATER IN WATER!
MAKE SURE THE HEATER IS COMPLETELY COOL DOWN BEGORE CLEANING
CLEANING: Clean the protective mesh with the vacuum brush attachment on your
vacuum cleaner. Clean the body of the Heater with a soft cloth.
CAUTION: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc., as they will
damage the Heater. NEVER use ALCOHOL or any other SOLVENTS.
STORAGE: Store the Heater with these instructions in the original box in a cool and
dry place.
WARNING: ALWAYS UNPLUG THE POWER CORD BEFORE MOVING OR SERVICING. DO
NOT IMMERSE THE HEATER IN WATER!
MAKE SURE THE HEATER IS COMPLETELY COOL DOWN BEGORE CLEANING
CLEANING: Clean the protective mesh with the vacuum brush attachment on your
vacuum cleaner. Clean the body of the Heater with a soft cloth.
CAUTION: Do NOT use gasoline, benzene, thinner, harsh cleaners, etc., as they will
damage the Heater. NEVER use ALCOHOL or any other SOLVENTS.
STORAGE: Store the Heater with these instructions in the original box in a cool and
dry place.
Maintenance
清理及維護
