12
Step 7; See Figure 7, 7A and 7B:
Install ROPS Bracket RH (8), ROPS
Bracket LH (9) and Rear Curtain
Support (14)
A.
Place the ROPS Bracket RH over
the lower set of bolt holes on the inside
of the ROPS shown in Figure 7.
B.
I
nsert two 3/8” x 2-1/4” bolts with 3/8”
washers inward through the ROPS and
ROPS Bracket, place a 3/8” nylock nut
on the lower bolt,
do not fully tighten.
C.
Repeat on left Side.
D.
Place the Rear Curtain Support onto
the top bolts of each ROPS Bracket,
add two 3/8” nylock nuts.
Do not fully
tighten.
Figure 7
Figure 7A
Figure 7B
8
14
9
