10
Step 5; See Figure 5, 5A and 5B:
Install Front Post (4) and Top Frame
Brace (6)
Note: Bent ends of Top Frame
Braces will point rearwards and lay
flat when properly installed.
Note: If you are installing the safety
glass windshield omit Top Frame
Braces.
A.
Insert a ¼” x 5/8” bolt outward
through the upper hole in the Foot and
the upper hole in the Front Post. Add a
nylock nut,
do not fully tighten.
B.
Insert a ¼” x ¾” bolt forward through
the end of the Front Panel Frame, the
tab on the Front Post and then the
lower end of the Top Frame Brace. Add
a nylock nut,
tighten just enough to
hold the brace up
.
Figure 5
Figure 5A
Figure 5B
6
4
