230V ac 50Hz IP20
Stirrup
Floor Lights
These instructions are provided for your safety in order to prevent the risk of Fire, Electric shock or Injury.
Please retain for future reference. When fitting is in operation, some parts will become hot; take care when
using/handling.
- Ensure the lamp type and max wattage is followed- do not exceed. Take care not to overtighten lamp.
- Do not touch the lamp (bulb) or lamp holder while in operation, as both become very hot.
- Turn off and unplug fitting, leaving lamp to cool before changing lamp. Dispose of old lamps carefully.
- Never leave a fitting without a lamp in position.
- Keep light fitting away from combustible materials such as soft furnishings.
- Ensure children do not play with the light fitting.
- Ensure the light is positioned on a solid, level and non-slip surface and make sure the position of the cable
does not pose a trip hazard.
- If the electrical flex or electrical components become damaged at any point, the fitting must be unplugged
from the power supply immediately and not operated until the damaged parts are fixed/replaced.
- For use in a dry, indoor environment only. Ensure the fitting does not come into contact with any liquids.
Cleaning and Maintenance
Metal finishes should only be cleaned with a soft, dry cloth. Do not use polishes or abrasives. Bone china
can be cleaned using a soft damp cloth with a mild detergent if necessary. Switch off power to the fitting
before cleaning. Spare parts are available for this product, please see contact details on the reverse.
L
N
Live
KEY
Neutral
Earth
L =
N =
=
*Mains
Supply
Fitting
*After 2004, wiring installation colours changed:
LIVE
Brown replaces Red
EARTH
Green/Yellow sleeving
NEUTRAL Blue replaces Black
BROWN
GRN/YEL
BLUE
BROWN
GRN/YEL
BLUE
MADE IN BRITAIN
E27
GLS
BALL
LAMP GUIDANCE
TYPE*
WATTAGE**
BASE
SHAPE
ü
ü
ü
ü
INCANDESCENT
CFL
ECO-HALOGEN
LED
40W MAX
11W
28W
7W
* Warm white (2700k) low energy lamps recommended.
** Wattage value provided as a guide to suitable lamps. Lower wattage than stated may be used.
60W MAX
15W
n/a
12W
100W MAX
20W
n/a
18W
FF523
FF524
FF079 & FF484
FF523
Stirrup 1 Floor Light
FF524
Stirrup 2 Floor Light, with Etched Glass
FF079
Stirrup 3 Floor Light with Etched Glass
FF484
Stirrup 3 Uplighter with Etched Glass
Safety Instructions
a
b
c
d
e
Visor Instructions (Stirrup Size 2, 3 and Uplighter)
Stirrup Size 2, 3 and uplighter are supplied fitted with an etched glass visor.
Prior to installation and re-lamping, this should be removed:
- Remove tab (a) from clip (d).
- Whilst supporting the glass (c) with one hand, undo clip to remove glass.
- Hold the glass in place against the opening of the reflector (b),
- Close the clip to close the visor band (e) around the rim of the reflector and
the underside of the glass, so the visor band supports the glass. Make sure
the band secures only around the rim as it could mark the shade if lined up
incorrectly.
- Insert tab into clip, bending top and bottom around clip to hold visor band
securely to the reflector.
