6
S O U N D B A R I N STA L L AT I O N US E R M A N UA L
COMPLETING THE INSTALLATION
Once the speaker has been wired the soundbar/LCR can be secured to the wall by sliding
it over the screws. Make sure to feed the wires into the wall as you prepare to mount the
speaker so they are not pinched, kinked or disconnected during the mounting process.
Your new loudspeaker(s) are now ready for your listening enjoyment.
Depending on the complexity of your system, there are several possible adjustments to
provide the best possible sonic experience. Most audio/video receivers (AVR’s) have some
type of test program that plays a signal through each channel to allow you to balance
the output. This is bets preformed from the principle listening position. There will also
be equalization (EQ) controls to adjust the frequency response as it is effected by the
parameters of the room.
If you are using a dedicated subwoofer, adjusting the balance and crossover point between
the sub and your Soundbar/LCR is critical. The ideal balance will provide deep warm bass
without overshadowing the mids and highs that are so critical in a musical performance.
This may take a few days and several small adjustments to get it right. Also, be aware
that different sources, BluRay Disc Players, Cable TV, streaming music will all have slightly
different volume levels and EQ curves. Even different television channels may vary in their
sonic presentation. This is normal and something you can adjust to your preference.
SOUND ADJUSTMENTS
