Origin Effects DELUXE61, Owner'S Manual, Page: 8 / 12

8
Origin Effects DELUXE61
Setting Your POST-DRIVE EQ
Use the tables below to help you set up the DELUXE61 for the first time with a new guitar amplifier or
flat-response device. Working through Steps 1 and 2 allows you to “set-and-forget” the POST-DRIVE EQ
controls and move on to having fun dialling in your ideal tone with the main controls.
Step 1: Set POST-DRIVE EQ switch for the connected amp or device.
AMPLIFIER OR CONNECTED DEVICE
POST-DRIVE EQ SWITCH POSITION
Power amp & guitar speaker
Mixing desk & cabinet simulation
Recording interface & cabinate simulation
P/AMP
Bright, mid-scooped guitar amplifier
EQ1
Dark or mid-rich guitar amplifier
EQ2
Step 2: Fine-tune the POST-DRIVE EQ with the ADJ control*
HOW IS THE DELUXE61’s TONE? ADJ CONTROL POSITION
Too bright or thin Clockwise
Too dark or woolly Counterclockwise
Just right! Leave in this position and enjoy using the pedal!
*Please note: the ADJ control is not active when the POST-DRIVE EQ switch is in the P/AMP position.
ADJ:
When EQ1 or EQ2 is selected, the ADJ knob lets you fine-tune the pedal’s output to suit the individ
-
ual response of your amp and the way its controls are set. As you turn the ADJ knob counterclockwise, this
proprietary filter design gradually rolls off bass and adjusts the high shelf response. The end result is a very
powerful and intuitive control. If your amp sounds too bright or thin with the DELUXE61 engaged, turn the
ADJ control clockwise. If it sounds too dark and wooly, turn the ADJ control counterclockwise.
POST-DRIVE EQ Controls (continued)