Origin Effects DELUXE61, Owner'S Manual, Page: 5 / 12

5
Origin Effects DELUXE61
Connecting the DELUXE61
9VDC:
Connect a 9VDC 2.1mm centre-negative mains power adaptor (minimum 100mA).
INSTR:
Connect to your guitar, bass or other instrument.
AMP OUT:
Connect to your amp or power amp.
F/SWITCH:
Connect to an external footswitch or effects switching system to allow control over the following:
Tap Tempo - this sets the tremolo speed remotely by sensing the time between two pulses. The tap
rate will be multiplied by the setting of the MULTI toggle switch.
TREM - the tremolo enable function can be switched from the F/SWITCH jack as well as from the
stomp switch, allowing recall over a range of sounds.
The F/SWITCH input is wired as follows:
CONNECTOR PIN FUNCTION
Tip Tap Function
Ring Tremolo Enable
Sleeve Ground
The Tap Tempo function can also be used by connecting a momentary footswitch via a TS jack.
Effects Switching Systems:
When connecting effects switching systems such as the Boss
®
ES-8 or
The GigRig G2
using a TRS lead, the tip should be configured for momentary operation to send tempo pulses, while
the ring should be set for latching operation. Both functions are activated by shorting the respective pin to the sleeve
(ground) pin.