6
7
844·674·4461
WWW.ORIGINACOUSTICS.COM
SPEAKER SELECTOR INSTALLATION MANUAL
This warranty may not be valid if the product was purchased
through an unauthorized dealer. This warranty only applies to
the individual that made the original purchase, and it cannot be
applied to other purchases. The purchaser must be prepared to
provide proof of purchase (receipt). This warranty will not be val-
id if the identifying number or serial number has been removed,
defaced, or altered.
This warranty does not cover the following:
• Accidental damage
• Damage caused by abuse or misuse
• Damage caused by attempted repairs/modifications by
anyone other than Origin Acoustics or an authorized dealer
• Damage caused by improper installation
• Normal wear, maintenance, and environmental issues
• Damage caused by voltage inputs in excess of the rated
maximum of the unit
• Damage inflicted during the return shipment
Before making any return attempts, it is required that you first
contact Origin Acoustics. Return product to Origin Acoustics
or your dealer, either in person or by mail. It’s preferable if the
product is returned in the original packaging. If this isn’t possible,
the customer is responsible for insuring the shipment for the full
value of the product.
This warranty is in lieu of all other expressed or implied warranties.
Some states do not allow limitations on implied warranties, so this
may not apply depending on the customer’s location. (For more
information, see
Magnuson-Moss Warranty Act.
)
Return Process
Requirements and Warranty Coverage
Specifications
Power Handling
100 watts RMS per channel
Frequency Response 20 Hz - 22kHz (+0dB, -0dB)
Selector Type
Noise-free, front access, pushbuttons
Wire Size Acceptance 2 or 4 conductor, stranded, 16 AWG to
12 AWG
Dimensions
1 ⅞” (4mm) H x 11 ½” (292mm) W x 7”
(178mm) D (including connectors and
pushbuttons)
Maximum Number of
Speaker Connectors
SL4 4 pairs
4 ohm minimum
SL6 6 pairs
4 ohm minimum
Minimum Amplifier
Impedance with All
Speakers Selected
SL4 with 8 ohm
speakers
6 ohm
SL4 with 4 ohm
speakers
5 ohm
SL6 with 8 ohm
speakers
5.3 ohm
SL6 with 4 ohm
speakers
4.6 ohm
