VGA
input
(connector
hub
PCB)
8
Micro ATX standoff / VGA loop cable installation
VGA loop cable
This cable loops the VGA signal
from the graphics card to the
12.1” TFT via the VGA bracket.
It fits to the connectors as shown.
The VGA is then connected internally
(see page 13 for PCB / cable reference).
Micro ATX standoff installation
When installing a micro ATX motherboard, screw
the 2 standoffs provided in the locations illustrated
above. These are for micro ATX only and MUST
NOT be installed if using a full ATX motherboard.
Summary of Contents for S21T
Page 1: ...Origen...
