TFT controls / menu operation
TFT controls / menu operation
12.1 inch TFT
(261 x 163mm)
aspect ratio
16 : 10
resolution
1280 x 800
supports
1920 x 1080
Begin by pressing the (menu/set) button to bring up the
on screen display (OSD). Use the and buttons to navigate
through the 10 menu categories. Press the button to select
a category, then (where appropriate) use to and to increase
or decrease the value as desired. Press the button again to
confirm the setting and repeat the process until you have made
all the required adjustments. To exit the OSD, simply locate the
EXIT category (10/10) and press (it will also exit automatically
after approximately 10 seconds of inactivity). The menu gudie
on the next page shows the route
and the adjustment
sequence
for each menu category (each assumes
you are not already in the menu, with the exception of Exit).
[in grey]
[in orange]
TFT power on / off *
Menu / set
Value up
Value down
*see page 16 for auto - power on feature
BRIGHTNESS - adjusts the picture brightness.
CONTRAST - adjusts the picture contrast.
PHASE - adjusts the noise of the image.
H POSITION - adjust the image horizontally.
CLOCK - adjusts video sampling clock.
V POSITION - adjust the image vertically.
LANGUAGE - language selection (default English).
AUTO - auto image adjust wizard.
RESET - resets to factory setting.
EXIT - exits the TFT menu.
Summary of Contents for S21T
Page 1: ...Origen...
