OPERATING MANUAL
PAVR2-20K
HP-5061
E
xternal speed
potentiometer
•
Securely connect about the wiring of the product. Failure to do so may result
in fire or electric shock.
•
Do not use the product in explosive or corrosive environments, in the
presence of flammable gases, locations subjected to splashing water, or near
combustibles. Doing so may result in fire, electric shock or injury.
Operation conditions
Storage conditions
Safety precautions
The precautions described below are intended to prevent danger or injury to
the user and other personnel through safe, correct use of the product.
Use the product only after carefully reading and fully understanding these instructions.
Handling the product without observing the instructions
that accompany a “Warning”symbol may result in serious
injury or death.
Warning
0 to +50 °C [+32 to +122 °F]
(non-freezing)
−20 to +70 °C [−4 to +158 °F]
(non-freezing)
85% or less (non-condensing)
No corrosive gas, dust.
Cannot be used in radioactive materials,
magnetic field, vacuum or other special environment
Up to 1000 m (3300 ft.)
above sea level
Up to 3000 m (10000 ft.)
above sea level
Ambient humidity
Ambient
temperature
Altitude
Do not disassemble or modify the external speed potentiometer.
Doing so may result in electric shock, injury or equipment damage.
Handling the product without observing the instructions
that accompany a “Caution” symbol may result in injury or
property damage.
Caution
Surrounding
atmosphere
Installation conditions
Install the external speed potentiometer to a flat plate.
The ambient temperature of this product may be different from that of the applicable
product. Check the specifications of the applicable product.
Applicable product
Hazardous substances: The products do not contain the substances exceeding
the restriction values of RoHS Directive (2011/65/EU).
∗
For the
AXH
and
BLH
Series, the wire diameter of the supplied I/O signal cable is
AWG26.Connect using the crimp terminal "AI 0,14-8" described in "Connection."
Thank you for purchasing an Oriental Motor product.
Use the product correctly after thoroughly reading this operating manual.
Only qualified and educated personnel should work with the product.
Characteristics, specifications and dimensions are subject to change without notice.
ORIENTALMOTOR CO.,LTD.
© Copyright ORIENTAL MOTOR CO., LTD. 2015
∗
L: This value represents the value
22.7
(
0.89
) minus the board
thickness [1.5 to 3.0
(0.06
to 0.12)].
Use crimp terminals when the connected
wire diameter is AWG24 or AWG26.
Connection method and the applicable wire diameter vary depending on
the driver or controller of the connected product.
Be sure to read the operating manual of the applicable product as
well before connection.
Do not apply an excessive power when installing, removing and wiring
the product. Doing so may result in damage to the product.
37.4
(
1.47
)
16.4
(0.65)
45
(
1.77
)
40
(
1.57
)
Applicable board thickness:
1.5
to
3.0 (0.06
to 0.12)
Dimensions
Unit = mm (in.)
Installation
Connection
Mounting hole dimensions
Unit: mm (in.)
Applicable board thickness:
1.5
to
3.0 (0.06
to 0.12)
0
38
-
0.4
(
1.5
-0.016)
35
±0.3
(
1.38
±0.012
)
4×R2 max.
0
Note
10 mm
(
0.39 in.
)
AI 0,14-8
［
AWG26(
0.14 mm
2
)]
∗
AI 0,25-10
［
AWG24
(0.25 mm
2
)]
∗
AI 0,34-10
［
AWG22(
0.34 mm
2
)]
∗
AI 0,5-10
［
AWG20(0.5 mm
2
)]
∗
AI 0,75-10
［
AWG18
(
0.75 mm
2
)]
∗
AI 1-10
［
AWG18
(1.0 mm
2
)]
∗
AI 1,5-10
［
AWG16(1.5 mm
2
)]
∗
∗
This is specifications of the manufacturer.
Manufacturer :
PHOENIX CONTACT GmbH & Co. KG
Model
：
•
Applicable crimp terminal
•
Applicable lead wire
Lead wire
Screwdriver
BLE2
Series
BLH
Series
∗
BLF
Series
BLE
Series
AXH
Series
∗
BX
Ⅱ
Series
DSC
Series
BX
Series
MSC
Series
TM
Series
ES01
/
ES02
MSS
・
W
Series
EMR
Series
MSC-1
AWG22
to
16
(0.3
to
1.25 mm
2
)
1
3
2
0.05 W
B curve
0
to
20
k
Ω
External speed
potentiometer
L
∗
1
2
3
32.4
(
1.28
)
