2 Installation
－
5
－
2.3 How to use the mounting reference surfaces
To ensure positional repeatability after removing and reinstalling the motorized linear slides, use the reference
mounting surfaces on the motorized linear slides base.
EZS3
EZS4
䇮
6
Crosswise mounting reference
surface on flange side
Crosswise mounting reference
surface on flange side
Lengthwise
mounting
reference
surfaces
Lengthwise
mounting
reference
surfaces
EZS3
EZS4
䇮
6
Lengthwise
mounting
reference
surfaces
Crosswise mounting reference
surface on bracket side
Lengthwise
mounting
reference
surfaces
Crosswise mounting reference
surface on bracket side
Drive pins into the motorized linear slides installation surface, and then position the motorized linear slides so
that the pins contact the reference mounting surfaces of the motorized linear slides.
2.4 Installing a load
Load
EZS3
,
EZS4
4×M4
㩷
Tightening torque: 2.4 N·m (340.8 oz-in)
EZS6
4×M5
㩷
Tightening torque: 5 N·m (710 oz-in)
Positioning
pin holes
(Pins cannot be
press-fit.)
Note
If the lengths of screws inserted into the motorized linear
slides exceed 8 mm (0.31 in.), the mounting holes in the
load may be damaged.
Load
8 mm
(0.31 in.) or less
Slides
