Setting of IP address
2 Har
32
5-4
When setting with DHCP server
The IP address, subnet mask and default gateway are automatically assigned from the DHCP server.
Set the IP address setting switch of the driver to “0” and the “Configuration Control” parameter to “2: DHCP server.” The
parameters and the DHCP server cannot be used in combination.
If the main power supply and the control power supply is shut off, the IP address obtained from the
DHCP server is cleared.
Related parameter
Parameter name
Description
Setting range
Initial value
Configuration Control
Sets how to obtain the IP address.
0: Parameter
2: DHCP server
2
Summary of Contents for A Step AZ Series
Page 14: ...1 Introduction 14 ...
Page 64: ...3 Implicit communication 64 ...
