BTP-R880NP Installation manual
Ending hexadecimal dumping function
Hexadecimal dump mode can be ended by turning off the power, or by pressing
the FEED button three times.
4.3 LED and Buzzers
4.3.1 LED
LED
Status
Description
On
Printer is powered on
Power Indicator (Green)
(POWER)
Off
Printer is powered off
Off
Printer is in normal status
Error Indicator (Red)
(ERROR)
Flash
Printer is in error status or Paper
near end
4.3.2 Description of LED and Error Status
Error information
ERROR LED
Buzzer
Print head is overheating
Six times
Six times
Input voltage is abnormal
Five times
Five times
Cutter Error
Four times
Four times
Cover Is Open
Three times
Three times
Paper End
Twice
Twice
Paper near end
Flashing slowly
No sound
Finding mark error or verify failed
Flashing slowly
No sound
Caution:
The temperature of the print-head is detected by means of a thermistor sensor.
If the temperature of the print-head becomes higher than 65
℃
, the protection
circuit of the printer will force the printer to stop printing.
5 Specifications
5.1 General Specifications
1) Printing method: Direct line thermal printing
2) Dot density: 203 DPI(H)
×
180 DPI(V)
3) Printing direction: Unidirectional with friction feed
4) Printing width (max): 80mm {2.52 "}, 640 dot positions
5) Characters per line (default): Font A: 42
Font B: 56
Kanji: 21
6) Character spacing (default): Font A: 0.25 mm {0.01"} (2 dots)
- 13 -
