![background image](http://html1.mh-extra.com/html/oricom/uhf5500/uhf5500_operating-instructions-manual_1650665023.webp)
23
At the highest level (1), the unit will pick up softer noise (including
background noise). At the lowest level (15), it will pick up only loud
noise.
VOX operation is not recommended if the radio will be used in a noisy
or windy environment, A VOX headset is also available, this can be
purchased from your re-seller or online at www.oricom.com.au.
VOX Delay Time Set
The UHF5500 has 15 levels VOX PTT release off delay time.
You can set the delay time from 1 to 15. Level 1 is shortest time.
Priority Channel Set
To store a Priority Channel, select the required channel in menu mode.
The letter "PRI" will appear when the selected channel is set to Priority.
This Channel will then be automatically monitored during the Priority
Scan.
Note:
You can only store one channel as your priority channel.
Duplex
Duplex mode can be turned on or off on the duplex channels When
turned on the transmit channel will be as shown in the table on page 17.
Key Beep
The Beep tone emits a tone when you press any of the buttons on the
microphone (except PTT button).
Roger Beep
This function emits a beep on the communication party to inform that
the transmission is finished.
Battery Power Save
Battery save feature extends the battery life by switching the receiver
circuit power On and OFF.
This feature automatically activates during standby mode.
Operations
OR 010610 Renew UHF5500 user manual.indd 23
2014-5-8 13:21:55