background image

Introduction 

The Oricom Digital TV Listener is an amplification system specifically designed for 
people with hearing difficulties. 

It can be used with all kinds of Audio, Television systems, suitable for individuals 
or groups without any interference. 

Audio output from a TV or audio device is encoded and transmitted by the Base, 
the wireless Headset receives the signal and decodes it to original audio sound. 

One Base can be paired with up to 4 Headsets. 

 

 Safety & Care advice 

To make the best use of this product and to use it safely, please read these 
instructions thoroughly before use and keep safe for future reference. 

 
Warning:

 

This product can be very loud.

 Take care to prevent others from 

using this product, if they do not have the same level of hearing loss. Excessive 
sound pressure from earphones and headphones can cause hearing loss. 

 

Caution:

 

Electric shock. DO NOT

 insert unattached plug heads in to mains 

power sockets. Plug heads MUST be fitted to the power adaptor. 

 

Electrical connection:

 The unit is designed to operate from a 100-240VAC - 

50/60Hz supply. (Classified as 'hazardous voltage' according to EN 60950 
standard). 

 

The unit does not incorporate an integral power on/off switch. To disconnect the 
power, either switch off supply at the mains power socket or unplug the AC 
adaptor. When installing the unit, ensure that the mains power socket is readily 
accessible. 

 

Caution: Risk of explosion if battery is replaced by an incorrect type. 
Dispose of used batteries according to the instructions. 

 

Keep the unit away from heat sources.  

 

DO NOT

 expose the unit to direct sunlight. 

 

Clean the Headset and ear pads regularly.  

 

DO NOT

 modify the unit in any way. 

 

Please note:

 The unit may be subject to interference from appliances that 

generate strong electrical or magnetic fields e.g. microwaves, mobile phones, 
lighting transformers etc. 

Summary of Contents for TV7300



















Reviews: