10
uSING ThE BABy mONITOr
(1) Press < > repeatedly to go to [ Lo], then press <
▲
>
and < > to change the values to set low temperature
trigger point.
(2) Press < > key several times to return back to monitor
mode or just short press power key once to save the
value.
(3) Similarly, press < > key to go to [ Hi] to set the high
temperature trigger point.
The Temperature sensor used in this Oricom baby monitor
is intended as a guide, to provide parents with an indication
of the room temperature in which the baby unit has been
placed.
NOTE:
1/ If the temperature goes above 27°C, [Hi ] appears
on the LCD display: A warning beep will be transmitted
periodically until the temperature returns to mid range.
2/ If the temperature goes below 19°C, [ Lo] appears on the
LCD screen. A warning beep will also transmit periodically
until the temperature returns to mid range.
4.8 Night Light
(1) Press < > repeatedly until the moon icon appears on
the LCD display.
(2) Press <
▲
> and < > to turn the baby unit night light
ON or OFF.
(3) Press <
> button to confirm the selection. And press
< > several times until no menu icon shows on LCD,
ie. back to monitor mode.
Note:
The upper and lower room temperature settings for the
alarm are for guidance only and are not a substitute for
personal supervision.
In extreme temperature conditions during summer or winter
the upper and lower temperature settings for the alarm may
be exceeded and result in the room temperature warning
being activated.
Under such conditions appropriate actions should be taken
by the parent or guardian to ensure the health and safety
of the child and on the basis that the room conditions are
considered satisfactory then the temperature warning
option can be temporarily disabled.
4.9 Vibration
(1) Press < > repeatedly until the vibrator icon appears
on the LCD screen.
(2) Press <
▲
> and < > to turn the parent unit vibration
ON or OFF.
(3) Press <
> button to confirm the selection. And press
< > several times until no menu icon shows on LCD,
ie. back to monitor mode.
When the vibration alarm is activated, the parent unit
vibrates when the sound in the room being monitored is so
loud that the red sound level LED's are activated.
4.10 Voice Activation
The sound detection sensitivity level (VOX) of the baby
monitor can be adjusted. If the baby is a quiet sleeper,
