background image

IMPORTANT NOTE

1. When moving between hot/cold environments do not charge the battery until the 

battery temperature acclimates (usually about 20 minutes).

2. Batteries can cause property damage and/or bodily injury such as burns if a 

conductive material-like jewellery, keys or chains touch exposed terminals. 

3. The conductive material may complete an electrical circuit (short circuit) and become 

quite hot.

4. Exercise caution in handling any battery, particularly when placing it inside a bag, 

pocket, purse or any container with metal objects.

11

12

Turning your radio on and off

Press and hold     for three seconds to turn your radio on. The radio chirps and the 
display will show all feature icons for a brief period. Press and hold     button for three 
seconds to turn off your radio.

Adjusting the volume level

When turned on, simply press

or 

button to adjust the volume to a comfortable

listening level.

Selecting the channel

1. Press the       button, the currently selected channel number will begin to blink.
2. Press the       or       button to select a channel.
3. Press the      button to set a new channel.

Roger beep (Talk Confirmation Tone)

This feature transmits a unique tone when you finish transmitting. In the same way as
saying “Roger” or “over”, it lets others know you are finished talking.
1. Press   button until     appears. Press   or   to enable or disable 

Roger beep.

2. When the roger beep is enabled,           will show in the display.
3. When you release the      button you will hear the roger beep.

Summary of Contents for PMR3000R
















Reviews: