14
Operation
Changing Channels
Your radio has 75 available channels, to communicate with other
radios's, you must have your radio tuned to the same channel.
1. Press the
menu
button once, the current channel number
flashes on the display.
2. Press
the button or the button to change the channel.
3. Press the
PTT
button to confirm and return to stand-by mode.
Note: If no button is pressed within 5 seconds during setting,
the unit will return to standby.
Duplex mode
The units support the use of repeater in Duplex mode or without
the use of repeater in Simplex mode. This Duplex mode is only
supported for Channel 1 to Channel 8 and Channel 41 to Channel
48. If the Channel is set either Channel 1to Channel 8 or Channel
41 to Channel 48,Press Menu until "r" is displayed, then press
or
to switch "ON/OFF" the duplex mode or Simplex mode.
To turn Duplex ON or OFF
1. Press
"menu"
button until
"r"
displays.
2. Press
or until "ON" displays to turn Duplex mode ON or
until “OF” displays to turrn Simplex mode.
3. Press
MENU
or
PTT
button to confirm your selection.
CTCSS (Continuous Tone Coded Squelch System)
The 2 digit CTCSS code corresponds to a specific tone frequency
the radio emits. Two users, with the same channel and CTCSS set
can hear one another. They will not be able to hear anyone else on
the channel unless the other radios have the same exact CTCSS
code enabled. The unit has 38 CTCSS codes available.
1. Press the
menu
button until the current CTCSS code flashes
on the display.
2. Press the
button or the button to change to another code.
3. Press the
PTT
button to confirm and return to stand-by mode.
