background image

Warranty information

Warranty information

This product is covered by a 12-month warranty against defective workmanship or
parts. The warranty does not extend to damage caused by misuse, negligence, water
ingress, battery leakage or lightning. This guarantee in no way affects your statutory
rights. Full details of the warranty are contained in the enclosed warranty card.

If you feel this product is not working correctly please consult the user guide and ensure
that you are using the product in accordance with the instructions.

For assistance with technical issues please consult our website for further information
or send us an email for a prompt response to your enquiry. In the unlikely event of a fault
developing, please contact us for assistance. If the product is then found to be faulty
you will be asked to return it directly to us with a copy of the purchase receipt.

21

Exposure to Radio Frequency (RF) energy

Safety and general information

Safety and general information

Exposure to Radio Frequency (RF) energy

Your radio contains both a receiver and transmitter. When it is turned on it receives and
transmits RF energy. Your Oricom unit is designed to comply with local 
regulatory requirements concerning exposure of human beings to RF energy (Specific
Absorption Rate Data (SAR).
No user licence is required in Australia or New Zealand.

2

This unit complies with all relevant Australian and New Zealand approval requirements including radio 
communications (Electromagnetic Radiation Human Exposure) standard 2003.

N13134

Summary of Contents for PMR1000R













Reviews: