22
Wi-Fi® Internet Viewing
• The following setup instructions will appear on the screen, select your Wi-Fi
network and enter “Password” (fig.12).
• Power on your camera and wait for the Red LED flashing on the camera.
Press and hold the PAIR button on the bottom of Camera, you will hear
a voice prompt “Ready for Pairing” then tap
Next
(fig.13)
fig.12 fig.
13
• Tap Generate QR code on your device and hold the QR code
15 to 30cm
in
front of Camera until you hear confirmation message “ Scanning
Success
”
from your device. (fig.14, fig.15)
fig.14 fig.
15