BASIC OPERATION
11
Recall feature
Recall feature
Recall feature can be used when you are using some services provided by your
network operators such as “call waiting”, etc. A subscription may apply for these
services, contact your network operator for more information.
While you are talking on the phone, press
R
key on the base unit or
key on
the cordless handset to send a Recall.
Call waiting (Australia only)
You can use the recall function to answer a second call while you are on the phone.
However this service needs to be turned on. For example, to turn on Telstra’s Call
Waiting service:
1
. Press on the base unit or
on the cordless handset to wait for dial tone
then press
4 3 # .
2
. You will hear a service tone then press
or
mentioned above.
Take two different calls at the same time
During a call, you will hear two loud beeps periodically to notify you of another
incoming call. If you wish to answer this call,
1
. Press
R
key. You will hear a dial tone.
2
.
Press
2
to put the current call on hold and talk with the second caller.
3
. Repeat steps 1-2 to swap between the two callers.
Recall settings are: Australia (100ms, SHORT) and New Zealand (600ms LONG).
If this feature does not work correctly, check the country option. To change the Recall
settings, press and hold
/P
key on the cordless handset to switch between
“LONG” and “SHORT” on the display.
