![background image](http://html.mh-extra.com/html/oricom/dtx4200/dtx4200_operating-instructions-manual_1650668014.webp)
14
Operations
Scanning
The Scan feature allows you to search for active channels automatically.
There are 3 scanning modes:
Open Scan, Group Memory Scan and Group tone Scan (a special case
of Group Memory Scan).
Open scan
Press SCAN/RM to start scan. The OS-SC sub menu display will appear
on the LCD display.
When a signal is found, scanning will stop at that channel to allow the
signal to be heard, then resume scanning when the channel is clear
again.
The scan resume time can be set to 5, 10 or 15
seconds of P5 (default).
ch 1-2-3-4-5-6-7 ….. 77-78-79-80
Note: During open scan rotating the channel
selector will not change the scan direction.
To stop the scan, press the SCAN/RM button or press the PTT.
Remove Memory in Scanning
To remove a channel from the scan,
press and hold SC/RM button for 2
seconds.
The channel will be removed from
the current scan. When the scan stops, the removed channel will be
reinstated.
MR
SCAN
RM
SWP
SRX
MW
MENU
GTS
2 sec
MR
SCAN
RM
SWP
SRX
MW
MENU
GTS