Basic settings
1.
After installing the batteries, the display should flash the word
“ENGLISH”
.
If not, press and hold
for approximately 4
seconds.
2.
Select the desired language using
or
. Press
DELETE
button.
3.
Select the desired contrast setting (2=Default) using or .
Press
DELETE
button.
4.
Set the hour (00-23) using
or . Press
DELETE
button.
5.
Set the minute using
or . Press
DELETE
button.
6.
Set the day using
or . Press
DELETE
button.
7.
Set the month using
or . Press
DELETE
button.
If you wish to change the language, contrast, time settings at a later
date, press and hold button for approximately 4 seconds and
repeat steps
2-7
above.
Operation
When the telephone is not in use, the date and time, number of new
and total number of calls STORED in the Caller ID MEM will be
shown in the display. The display will show the caller number (and
name if available).
Making a call
1.
Pick up the handset or press
SPEAKER
button (the speaker LED
will light) and wait for a dial tone.
2.
Dial the number you wish to call. The display will show the
number that you are dialing. If you dial a number over 14 digits
long, it will show the last 14 digits only.
3.
When you have completed your call, hang up the handset or
press
the SPEAKER
button again to release the telephone line.
It is possible to switch from a handset to speakerphone conversation
by pressing the
SPEAKER
button and picking up or hanging up the
handset accordingly.
7