![background image](http://html1.mh-extra.com/html/oricom/c1000-1-8-ghz/c1000-1-8-ghz_owners-manual_1650601018.webp)
35
Programming
Returning to factory Default Setting
•
Press and hold PROGRAM key
during Standby.
•
Press and hold “9” to return the
phone to the factory default
settings.
(The display will show
“888888888888888888”.)
•
Press PROGRAM key to confirm
the selection.
•
Press CLEAR key to exit.
•
Refer to the default value section
for all factory settings.
36
Additional Features
Call Recording
•
External recording equipment can
be connected to the 2.5 mm
recording jack on the base unit for
call recording.
Out of Range Warning
•
During phone mode, the LED’s on
the POD flashes RED quickly and
the signal icon flashes when it is
too far from the base.
•
User should move closer to the
base so the call will not be
terminated.
•
When the POD is moved close
enough to the base, the LED’s
and the signal icon will stop
flashing automatically.
Paging
•
Press the PAGE button at the
base during Standby to locate the
POD.
•
The POD will ring until any key is
pressed or stop after 30 seconds
if no keys are pressed.