![background image](http://html1.mh-extra.com/html/oricom/babysense-2/babysense-2_user-manual_1650558009.webp)
6
Installation
4. Sensor pad installation:
• When using for infant not yet able to crawl, place one sensor pad as
shown in illustration 3. Make sure the sensor is placed underneath
baby’s location in cot.
• When baby begins to crawl, and is able to move onto areas not
"covered" by a single sensor pad, attach the second sensor and place
the two sensors as shown in illustration 3.
PLEASE NOTE
: The sensors must be placed with the marking “THIS SIDE
UP” facing upwards.
Sensor
pads
(Under mattress)
Control unit
I
llustration 3
Top cot view
For babies not
yet able to crawl
For crawling babies
Top cot view
5. Pass the cord(s) of the sensor pad(s) through special openings in the
holder as shown in illustration 4.
Cables
I
llustration 4
Control unit
holder
PLEASE NOTE:
Do not attach the control unit to the drop side of the cot.