8
*Need some help? Call 02 4574 8888 or go to
www.oricom.com.au
Installing & Removing Filters
Installing & Removing Filters
Filter replace indicator
When the
FILTER RESET
light switches on in red continuously, this indicates that it is time to replace
the filter.
Replace the filter according to the directions below, then press the
POWER
button holding for 5
seconds to reset the filter indicator. The
FILTER RESET
light will then turn off.
*True HEPA Filter life is approximately 6 months.
1. Turn off and unplug the Air purifier, turn the air purifier upside down.
2. Remove the screw from the base then twist the base to open.
3. Remove the dirty filter and insert the new filter into the Air Purifier.
4. Reattach the base to the unit and secure it with the screw.
Note: If the filter is not in place or not fitted correctly the Air purifier will not operate.
Cleaning & maintaining
The Air Purifier should be cleaned at least monthly using a clean, dry and soft cloth. More frequent
cleaning may be required depending on environmental conditions.
Ensure the air purifier is switched off and disconnected from the power outlet and allow all parts to
cool before cleaning or storing.
NOTE:
- Do NOT stick any foreign objects or your fingers inside of the unit.
- Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in the unit while cleaning as
they will damage the Air Purifier.
NEVER use alcohol or other solvents.