Orico NS200RC3, User Manual

Page: 9 / 24

Ⅲ Set Up RAID via ORICO HW RAID Manager
(2) Remove it from MAC
First, stop the read and write operations of the hard drive, and then drag the disk drive
to the Recycle Bin to complete the uninstall.
2.4.3 Remove Devices
(1) Remove it from the Windows system
First, stop the read and write operations of the hard drive, and then click the USB small
icon on the taskbar, select the disk drive that is needed to be uninstalled to complete
uninstall.
- 7 -
3.1 About RAID mode3.1 About RAID mode
RAID10：
Security and the promotion of transmission performance are combined into
RAID1 and RAID0, but the use ratio of hard drive is only 50% and higher demand
on data safety is recommended.
CLONE： CLONE consists of at least two drives storing duplicate copies of the same data.
In this mode, the data is simultaneously written to two or more disks. Thus, the
storage capacity of the disk array is limited to the size of the smallest disk.
RAID0 : It has the fastest data read speed but had no protection that all data will be lost
due to one damaged hard drive, which is applicable to temporary storage and
high-speed transmission for data,such as video editing and other scenes.
RAID1 : Data storage is the most safe and not to be worried to lose data even if one hard
drive is damaged. However, the use ratio for hard drive is just 50% ,thus it is