Orico NS200RC3, User Manual

Page: 8 / 24

2.4.2 Connect with computer
After inserting the hard drive, insert the original power adapter into the power port, use
the data cable to connect the product data port, and the other end is connected to the
computer's USB port.
- 6 -
Step2: Put the hard drive into the disk
station, use the hard drive to open the
shrapnel, insert one end of hard drive
with interface into the disk channel.
Step3: Close the lid, the lid will be auto-
matically adsorbed by the disk station for
the magnetic opening type.
Note: Insert the hard disk, with the front
side of the hard disk (with sticker) to the left.
2.4 Instructions
2.4.1 Hard drive Installation
Step1: Open the disk station, hold the
product by hand, and pull out the mag-
netic lid directly with another hand.