(a) Lock cam by turning clockwise 1/4 turn. Turn until snug.
(b) Attach Inner Glides to Drawer with Euroscrews. Notched End should be at back.
(c) Attach Handle with Machine Screws.
a
c
b
b
a
c
a
freedomRail Garage Assembly Instructions
3 Drawer GOBox
Installing Glides
Step 5: Separate Glides
Black Tab
Outer Glide
Inner Glide
Attaches to Drawer
Attaches to GOBox
Notched
End
Step 6: Attach Outer Glides to GOBox
Step 8: Mount GOBox onto Uprights
Step 9: Attach Drawer Panels and Drawer Bottom
Step 10: Attach Front Panel Connectors
Step 11: Attach Drawer Glides and Handle
Step 12: Insert Drawers
(a) Pull out Inner Glide to expose Black Tab.
Install Backing with Nails provided into Top and Bottom Panels only.
(a) Attach Sides to Back. (b) Secure with 1 5/8" Wood Screws. (c) Slide in Bottom.
(a) Position Drawer on Glides and push in Drawer completely. Repeat Steps 9, 10, 11, and 12 for
two Small Drawers.
NOTE: To remove Drawers, push the Black Tab while pulling out the Drawer.
OrganizedLiving.com
1-800-669-3225
June 2018
7315-2006
©
2018 Organized Living
Bloomington, IN 47403
Screw in Connector Bolts and attach Front.
Mount GOBox onto Uprights by inserting Hanging Brackets into the innermost track of each Upright.
Two people recommended for installation.
Turn GOBox on its side. Attach Outer Glides with Euroscrews.
Install Outer Glides in holes 1, 2, and 3. Repeat for other sides.
Step 7: Install Backing
Assembling/Inserting Drawers
1
2
3
GOB
ox F
ron
t
Bumper
