ORGA L85EX Installation And Maintenance Manual Download Page 10

SAFETY

10

  Version 2.1

4

Any damage induced by failure of an Orga supplied Product not under warranty or by 
any Product not supplied by Orga.

Orga shall not be responsible for Buyer's or any third party's Product, Product information, 
or memory data contained in, sorted on, or integrated with any Product returned to Orga, 
whether under warranty or not. Buyer is responsible for backing up its programs and data 
to protect against loss or corruption.

(e) Repair or redelivery as meant in the previous paragraphs shall in principle be effected 
only within the Netherlands. Repair and or redelivery outside the Netherlands shall only be 
effected if this can reasonably be requested of Orga, such to be judged exclusively by 
Orga.
With respect to noticeable defects, the Buyer must submit a claim in writing within three (3) 
working days after delivery, failing which any claim on Orga will lapse.

Claims with respect to other defects must be made in writing within ten (10) working days 
after their appearance, failing which any claim on Orga will lapse.

In respect of Products or parts of Products which Orga received from third parties, the 
warranty obligations granted by Orga to the Buyer shall never exceed in nature nor in 
duration the warranty obligations granted by those third parties to Orga.

(f) This warranty is exclusive and in lieu of all other warranties, whether written or oral, 
express, implied or statutory, including, without limitation, any implied warranties of 
merchantability, fitness for particular purpose, or non-infringement, all of which are hereby 
expressly disclaimed. No extension or expansion of this warranty shall be binding upon 
Orga unless set forth in writing and signed by Orga's authorised representative.

(g) All disputes existing between parties shall be heard exclusively by the Rotterdam 
District Court, unless Orga prefers another competent forum. This warranty notice is 
subject to Dutch law. The stipulations specified in the Convention of International Sale of 
Goods of 11 April 1980 (Weens Koopverdrag) do not apply, nor does any future 
international regulation concerning the purchase of moveable property of which parties 
can make use.

(h) Orga reserves the right to modify its warranty at any time, at its sole discretion.

Summary of Contents for L85EX









































































Reviews: