3
EN
1. Power adapter socket (optional)
2. Channel setting slide switches (
SW1
)
3. Color-coded connector for connecting solar panel
4. Rechargeable battery compartment
5.
RESET
button
6.
KEY
button: for wind direction calibration
7.
UV
sensor socket (not available now)
8.
SOLAR
sensor socket (not available now)
9.
RAIN
sensor socket
10.
TH
(temperature & humidity sensor) socket
11.
WIND
sensor socket
12. Pairing slide switch (
SW4
)
13. LED lights (blue/green/red)
RAIN GAUGE
Figure 6 – Top View
1. Plastic debris filter
2. Rain collector
3. Collector hole
Figure 7 – Bottom View
1. Screw holes
2. Rain sensor
3. Rain collector installation hole
4. Balance indicator
5. Sensor cable
6. Tipping bucket
7. Drain
holes
8. Hole for mounting insert
TEMPERATURE & HUMIDITY SENSOR
Figure 8
1. Screws (Type B)
2. Sensor casing
3. Temperature and humidity sensor
4. Screws (pre-installed)
5. Sensor cable
WIND SENSOR
Figure 9
1. Wind cups (anemometer)
2. Wind vane
3. Wind sensor holder
4. Sensor cable
DETAILED LCD DISPLAY
LCD DISPLAY
1.
: Enter setting modes
2.
: Set and view status of clock and
HI
/
LO
alarms
3.
: View current reading and memory.
4.
/
: Toggle between 8 different channels / low battery indicator
5.
: Change display/measurement units
6.
: Turn alarm on or off
7.
: Press to decrease value
8.
: Press to increase value
9.
Clock / alarm / weather forecast / moon phase
10.
Sunrise/sunset area
11.
Dew point / heat index / wind chill area
12.
Outdoor temperature and humidity area
13.
Indoor temperature and humidity area
14.
Wind speed / direction area
15.
Bar chart area
16.
Barometer area
17.
Rainfall area
INDOOR TEMPERATURE & HUMIDITY