2
EN
TEMPERATURE & HUMIDITY SENSOR
1 x Thermo/hygro casing
with sensor installed
(THGN300)
3 x Screws
(Type B, with 3 x lock washer
& 3 x flat washer)
WIND SENSOR
1 x Wind sensor unit
(WGR300)
1 x Wind cups
1 x Wind vane
4 x Nylon cable tie
1 x U-bolt
(with 2 x lock washer & 2 x flat washer
& 2 x hex nut)
ASSEMBLY PARTS
2 x Screws (Type A, with 2 x
lock washer & 2 x flat washer)
1 x Screw driver
ACCESSORIES - SENSORS
The system can expand up to 8 thermometer & humidity sensors and be compatible
with other weather sensors. Optional wireless remote sensors (coming soon) such
as those listed below can be purchased separately. For more information, please
contact your local retailer.*
• Wireless repeater (Expand the transmission range)
• UV sensor (UV index & UV dose)
• Solar radiation sensor (Solar radiation, THSW & Evapotranspiration (ET))
• Aspirated fan (Increase accuracy of temp/humidity sensor)
• Soil/Leaf sensor (Soil moisture/temperature & Leaf wetness)
* Features and accessories will not be available in all countries.
OVERVIEW
MAIN UNIT
Figure 1 - Front View
1. LCD display
2. Antenna
Figure 2 - Back View
1. Battery compartment
2.
USB
socket
3. Power adapter socket
4. Backlight (continuous) slide switch
ON/OFF
5.
RESET
: Reset unit to default settings
6.
EU
/
UK
slide switch (WMR300 only)
TRANSMITTER BOX
Figure 3 - Front View
1. Solar panel
2. Antenna
3. Screw holes
Figure 4 - Back View
1. Cable slot
2. Rubber stopper
3. Mounting bracket
4. Mounting ring
Figure 5 – Inside View