8
EN
volume
to change the volume level:
Use
or
to increase or decrease volume.
reset
to reset the unit:
Remove the batteries for two minutes and insert them again.
talk to anotHer transceIver
For best transmission speak about 5 cm away from the radio and leave a
short pause before speaking once you have pressed
.
to talk to another transceiver:
1. Press and hold
to check if the channel is free.
2. Press and hold
and speak into the microphone to transmit.
When finished, release the button. The transceiver will automatically
play received transmissions.
3. Rel
ease
once you have finished speaking to allow other
radios to respond.
note:
You can only communicate with another transceiver that is on the
same channel and using the same CTCSS code as your transceiver.
PaGe anotHer transceIver
to page all transceivers tuned to the same channel:
Press
.
note:
The call tone will be heard from your device and from the receiving
party’s unit at the same time.
P/N:086L004722-016 REV.1 PAGE: 10/152
